echo ' ' ;

HEAT-TIMER PRODUCT FINDER

Select the system and features that you are looking for in a Heat-Timer product
Please note: Not all fields may apply, so only select what is required.

Chinese_SimplifiedCN

2-Way and 3-Way

2 and 3-Way Motorized Valves for the Steam, Vacuum, and Hydronic Heating Systems

 

 

Overview

 

2-Way Valves for Steam Heating
Two-way valves can turn on or off the flow of steam from the boiler or other sources into a steam distribution system.  A typical example of this type of application would be using steam to heating radiators in a one or two pipe steam heated building using the MPC Platinum control.

 

2-Way Valves for Steam to Hot Water Heat-Exchanger
Two-way valves can be used to control the amount of steam entering a system.  A typical example of this type of application would be to regulate the amount of steam entering a heat exchanger to maintain the hot water output temperature using the HWR Platinum control.  When the load changes, the valve is signaled to change the amount of steam entering the heat exchanger.  See HWR Platinum control.

 

2-Way Valves for Vacuum Heating
Two-way valves can modulate the flow of sub-atmospheric steam from the boiler or other sources into a steam distribution system.  These actuators are equipped with a position feedback signal.  In addition, valve sizes up to 6” can be ordered with a valve percent opening gauge.  A typical example of this type of application would be using vacuum steam to heat radiators in a building.  When the control, such as the SRC Platinum , calls to put heat into the system, the two-way valve partially modulates open and steam flows into the radiators based on the outdoor air temperature. Then when the control determines that sufficient heat has entered the radiators, the control marginally closes the two-way valve reducing the flow of steam, or closes the valve.

 

3-Way Mixing Valve Applications
Three-way valves are used to mix heating water to a desired temperature. The hot water from the boiler is blended with the correct proportion of cooler water returning from the system to maintain the target temperature as the HWR Platinum control resets the hot water temperature based on outside temperature.

 

 

 

 

2-Way Valve Features (No-Feedback)

 

  • Single-Seated (Sizes 1½” to 6″) All others are Double-Steated
  • Valves come complete with motors/actuators and transformers
  • Designed to withstand the temperature and pressure demands of most types of HVAC systems
  • Valve motor has infinite adjustability between fully open and fully closed
  • Flange mounted (Sizes 2½” to 10″)
  • Threaded NPT (Sizes 1½” to 2″)
  • High performance direct-drive actuators
  • Rated for pressures up to 125psi
  • Contoured plug type for continuous flow even at the smallest opening
  • Iron body for logivity and durability (Sizes 2½” to 10″)
  • Bronze body (Sizes 1½” to 2″)
  • Bronze Trim (Sizes 2½” to 10″)
  • Stainless-Steel Trim (Sizes 1½” to 2″)

 

2-Way Valve Features (With-Feedback)

 

  • Single-Seated (Sizes 1½” to 2″) All others are Double-Steated
  • Valves come complete with motors/actuators and transformers
  • Designed to withstand the temperature and pressure demands of most types of HVAC systems
  • Valve motor has infinite adjustability between fully open and fully closed
  • Flange mounted (Sizes 2½” to 10″)
  • Threaded NPT (Sizes 1½” to 2″)
  • High performance direct-drive actuators
  • Rated for pressures up to 125psi
  • Contoured plug type for continuous flow even at the smallest opening
  • Iron body for logivity and durability (Sizes 2½” to 10″)
  • Bronze body (Sizes 1½” to 2″)
  • Bronze Trim (Sizes 2½” to 10″)
  • Stainless-Steel Trim (Sizes 1½” to 2″)

 

3-Way Mixing Valve Features

 

  • Valves come complete with motors and transformers
  • The valves and their packing are designed to withstand the temperature and pressure demands of a vacuum system
  • Valve motor has infinite adjustability between fully open and fully closed
  • Flange mounted (Sizes 2½” to 8″)
  • Threaded NPT (Sizes 1″ to 2″)
  • High performance direct-drive actuators
  • Rated for pressures up to 125psi
  • Contoured plug type for continuous flow even at the smallest opening
  • Iron body for logivity and durability (Sizes 2½” to 8″)
  • Bronze body (Sizes 1″ to 2″)
  • Bronze Trim (Sizes 2½” to 8″)
  • Stainless-Steel Trim (Sizes 1″ to 2″)

 

 

2-Way No-Feedback Motorized Valve Models

 


SIZE CATALOG No. Cv DIMENSIONS MOUNT BODY TRIM WEIGHT Lbs ACTUATOR
A B C
1 ½” 928051-50-VM 24 5 ¾ 3 ¼ 19” NPT Bronze S. Steel 31 VM-660
2” 928052-00-VM 40 6 ½“ 3 ⅝ ” 19 ¼” NPT Bronze S. Steel 35 VM-660
2 ½” 928252-50-VM 65 9” 4 ¾” 20 ¾” Flanged Iron Bronze 71 VM-660
3” 928253-00-VM 90 10” 5 ⅜” 21 ⅝” Flanged Iron Bronze 88 VM-660
4” 928254-00-VM 170 13” 6 ⅜” 22 ⅝” Flanged Iron Bronze 135 VM-660
5” 928255-00-VM 280 15 ¾” 5 ¾” 23 ¼” Flanged Iron Bronze 150 VM-660
6” 928256-00-VM 360 17 ¾” 6 ½” 23 ⅞” Flanged Iron Bronze 191 VM-660
8” 928058-00-VM 680 16 ¼” 8 ⅞” 25 ⅛” Flanged Iron Bronze 306 VM-660
10” 928060-00-VM 960 20” 9 ⅞” 25 ⅞” Flanged Iron Bronze 451 VM-660

• For retrofit applications where valve dimensions are critical, contact Heat-Timer Customer Service.


2-Way with Feedback Motorized Valve Models

 

SIZE CATALOG No. Cv DIMENSIONS MOUNT BODY TRIM WEIGHT Lbs ACTUATOR
A B C
1 ½” 928651-50-VM 30 7 ⅜” 3 ⅞” 24 ¼” NPT Iron Bronze 25 VM-330
2” 928652-00-VM 42 7 ⅜” 3 ⅞” 24 ¼” NPT Iron Bronze 30 VM-330
2 ½” 928152-50-VM 70 7 ¾” 4 ⅛” 24 ⅝” Flanged Iron Bronze 50 VM-330
3” 928153-00-VM 100 9” 4 ⅜” 24 ⅞” Flanged Iron Bronze 70 VM-330
4” 928154-00-VM 200 11 ⅜” 5” 26 ⅝” Flanged Iron Bronze 105 VM-330
5” 928155-00-VM 260 12” 6 ⅞” 27⅜” Flanged Iron Bronze 160 VM-330
6” 928156-00-VM 350 14 ⅛” 7 ⅝” 28 ¼” Flanged Iron Bronze 200 VM-330
8” 928658-00-VM 680 16 ¼” 8 ⅞” 29 ¾” Flanged Iron Bronze 295 VM-1100
10” 928660-00-VM 960 20” 9 ⅞” 30 ½” Flanged Iron Bronze 440 VM-1100

 


3-Way Mixing Motorized Valve Models
3-way motorized valve

 


SIZE CATALOG No. Cv DIMENSIONS MOUNT BODY TRIM WEIGHT Lbs ACTUATOR
A B C
1” 928301-00-VM 11.6 4 ¼” 2 ¾” 18 ⅜’ NPT Bronze S. Steel 25 VM-660
1 ½” 928301-50-VM 29 5 ¾” 3 ⅞” 19 NPT Bronze S. Steel 32 VM-660
2” 928302-00-VM 46.3 6 ½” 4” 19 ½” NPT Bronze S. Steel 36 VM-660
2 ½” 928302-50-VM 69 9” 7 ⅛” 20 ¾” Flanged Iron Bronze 80 VM-660
3” 928303-00-VM 86 10” 8” 21 ⅝” Flanged Iron Bronze 99 VM-660
4” 928304-00-VM 156 13” 9 ⅞” 22 ⅝” Flanged Iron Bronze 155 VM-660
5” 928305-00-VM 270 15 ¾ 9 ¼” 21 ½” Flanged Iron Bronze 173 VM-660
6” 928306-00-VM 347 17 ¾ 9 ⅞” 22 ¼’ Flanged Iron Bronze 218 VM-660
8” 928308-00-VM 450 16 ¼ 11 ½” 25 ⅞” Flanged Iron Bronze 331 VM-1100

 

N/A

N/A

N/A